What material is used in HBY-30CA mortar curing box? HBY-30CA mortar curing box [instruction manual] Shanghai Leiyun adheres to the tenet of “Science and Technology Innovation, Honest Service, Quality*, Customer Supremeâ€. Ten years old brand is trustworthy! Resounding throughout the country, in the future, our company will try our best to create a more perfect service platform, so that customers can get a large degree of satisfaction! * Temperature and humidity CNC, inner stainless steel, can be maintained: 174 Shanghai J.Shine Co.,Ltd , https://www.jshinechem.com
The HBY-30 dry shrinkage curing box is made on the original basis. The improved curing box has more uniform temperature and humidity, less temperature difference, and no dripping from the top of the box. The products are standardized for the strength and setting condensation time of cement, concrete and cement products according to the state for mixed mortar and cement plants and construction units, highway and bridge engineering units and relevant scientific research quality inspection departments.
One point for a price, any kind of thing survives, definitely not because of price, not because of discounts, but because of quality, service, value and being needed! At a price, you can never buy a Mercedes-Benz at the price of Benben. I sell not only products, but also quality, integrity and service! Believe in the brand, believe in quality, strong technical force, superb production technology, perfect after-sales service!
HBY-30CA mortar curing box [working principle]
When the temperature inside the box is higher than the set temperature, the temperature controller controls the cooling. When the temperature and humidity inside the box is lower than the set temperature and humidity, the temperature controller controls the heating and humidifying system to work, and repeatedly cycles to control the temperature and humidity at the set temperature. Within the humidity range. In order to avoid frequent operation of the thermostat relay, the factory temperature is set at the upper limit of 21 ° C, the lower limit of 19 ° C, so that the relay operating range is within ± 1 ° C.
HBY-30CA mortar maintenance box [Instructions for use]
1. The instrument should be placed in a ventilated and dry environment, away from the wall by more than 50 cm, and placed stably, check whether the door switch is flexible (220V, 1.5KW regulator installed in the front and rear).
2. Remove the upper tank of the humidifier and add water to the bottom of the tank (must be distilled water).
3. Insert the plug into a 220V socket with good grounding.
4. Adjust the value required for the temperature and humidity controller button settings.
5. Press the power supply and the instrument will enter the working state.
HBY-30CA mortar curing box [main technical indicators]
1. Temperature controller error: ±2°C
2. Control humidity: 60±5RH%
3, the power supply voltage: 220V ± 10%
4, power frequency: 50HZ
5, compressor power: 125W
6, heater power: 1500W
7. Effective volume: (length × width × height) 55 × 58 × 116 (cm)
8, the internal test piece shelf is divided into 5
9, there are glass doors and iron doors to choose from. 