Rice Transplanter is a kind of agricultural machinery for planting rice seedlings in rice fields. When planting, first take out several rice seedlings from the seedbed with mechanical claws and plant them into the soil in the field. In order to keep the angle between the seedbed and the ground at right angles, the front end of the mechanical claws must adopt an elliptical action curve when moving. The action is accomplished by means of a planetary mechanism of rotating or deforming gears, and the forward engine can drive these action machines at the same time. The rice transplanter must have non-slip wheels and floating design to travel on the soil. If the transplanted seedlings are in pieces, the rice seedlings are taken out from a specific seedling box and planted mechanically. Walking Transplanter,Walking Farm Transplanter,4 Rows Walking Transplanter,Walking Type Rice Transplanter Taizhou Yingtian Agricultural Machinery Manufacturing Co., Ltd. , https://www.sakuradaagc.com
What are the considerations for choosing an Aquametro flowmeter?
The selection of the Aquametro flowmeter mainly pays attention to the following points:
1 Flow range: select the size of the measured hydraulic flow;
2 Flowmeter to measure the viscosity of the liquid: to find out what density or viscosity of the hydraulic fluid, consider entering the parameters of the selection gauge;
3 The supply voltage of the flow sensor head: generally 10-30VDC, whether it meets the requirements of the display or measurement and control system, the definition of pulse high and low level (this requires engineers to determine);
4 Flowmeter ambient temperature and medium temperature: Check whether the ambient air temperature exceeds the nominal temperature of the flowmeter. Also pay attention to the medium temperature. If the requirements are not met, a special high-temperature flowmeter should be used.
5 Flowmeter hydraulic interface: What interface or sealing method is adopted.
As a high quality product in the world market, the flowmeter has strict inspection equipment and processes in the manufacturing process. The only special consideration when using the flowmeter: the front end of the flowmeter must have a filter to prevent large particles from entering the flowmeter and damage the flowmeter. The oil cleanliness can meet the requirements before the flowmeter can be connected to the system. Generally, it is required to be 10μm. under.