1. The electrothermal constant temperature incubator has no explosion-proof function, so corrosive and flammable items are prohibited from being placed in the box. 2. Do not place the electrothermal constant temperature incubator in a corrosive environment containing acid or alkali to avoid breaking the electronic components. 3. Pay attention to the protection of the electric heating constant temperature incubator box paint surface affects the box shape is beautiful. 4. When not used for a long time, the power should be blocked, and the liquid in the ground should not be allowed to enter the machine to avoid damage to the host. 5. Before use, it is necessary to pay attention to whether the power supply voltage used is consistent with the voltage of the rule, and the grounding pole of the power socket is effectively grounded according to the rules. 6. When using the power, do not touch the electrical parts of the space on the left side of the box or wipe it with a damp cloth and water. 7. The power cord should not be wrapped around metal objects. Do not place it in a hot or humid place to prevent the rubber from aging and causing leakage. 8. The test object should not be over-squeezed in the box, so that the air activity can be dredged, and the heat inside the box is evenly distributed. The bottom plate of the sputum is close to the electric heater, so it is not suitable to place the test object. In the laboratory, the wind top flap should be properly opened to facilitate the conditioning of the temperature inside the box. 9. When the electric thermostat incubator is put into valuable strains and cultures, it should be investigated diligently, and abnormal conditions should be intercepted, and the power supply should be blocked immediately to avoid unnecessary or unnecessary loss. 10. Do not open the temperature controller to prevent damage when it is not necessary. 11. The power supply must be blocked after each application. It is often necessary to clean the tank and clean the water in the tank. 12. When the application temperature is high, you should pay attention to the burnt. 13. The fuse tube is installed in the left space of the box. When it is interchanged, it is required to open the side door, and it is necessary to block the power supply. 14. After the packaging, the electric heating constant temperature incubator shall be replaced or repaired by the manufacturer free of charge when the goods cannot be operated normally from the date of leaving the factory (within one year of use) under the conditions of keeping and retaining the rules. Components. The greenhouse a filled with equipment like hydroponic, irrigation, auxiliary lighting ,temperature and humidity control and also may be automatically controlled by a computer to maximize potential growth. Auxiliary Facilities,Greenhouse Ventilation Fan,Greenhouse Fogging System,Greenhouse Movable Irrigation JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.engreenhouse.com
Hydroponics can be used to make the most use of the interior space. The relatively closed environment of a greenhouse has its own unique management requirements, compared with outdoor production. Pests and diseases, and extremes of heat and humidity, have to be controlled, and irrigation is necessary to provide water. Most greenhouses use sprinklers or drip lines. Significant inputs of heat and light may be required, particularly with winter production of warm-weather vegetables.