China Extract Powder For Use As Dietary Supplement Extract Powder, Extract Powder Manufacturer Shaanxi Kang New Pharmaceutical co., Ltd. , https://www.kangnewpharmas.com
1. The traction wheel is slipping, the traction wheel is worn, and the traction wheel locking screw is loose. For both reasons, the traction wheel locking screw can be tightened.
2. Product error, in the production process, the inconsistency between the bottom and the edge will cause labeling deviation, which can only be solved by controlling the quality of the product.
3. The labeling machine is biased, the traction mechanism is relaxed, and the label is pulled back and forth to let it automatically go straight. After the label is in the positive direction, clamp the limit ring on both sides and guide the label.
4. The direction of the label is not parallel to the direction of product transport, and parallel can be achieved by adjusting the inclination of the labeling head.
5. Label error, the solution is to control the quality of the label.
6. The belt is slack, and the labeling of the manganese sheet is slack, the labeling is loose, and the detection is inaccurate; the pressure marking rubber on the stripping board is loosened, the label is slack, and the labeling is inaccurate. The pressure-related pressure-receiving device can be solved.
Secondly, the side-down problem of the labeling machine means that in the process of labeling, the product is always running, and there will be a side-down phenomenon. First, the *step is to find out the cause of the side-down, then the main reasons include:
The rear end of the guiding mechanism is too tight and adjusted outwards to ensure smooth delivery;
2. The height of the guiding mechanism is high in the product, and the guiding mechanism can be adjusted up;
3. The top adjustment is too low, which means that when the two products are close, the bottle will be floated or the bottle will be inverted, and the height of the press top can be adjusted.
4. Turn the bottle when using the Shanghai labeling machine for labeling. The pressure top adjustment is too high, and the side is down when the force is applied. Adjusting the height of the top can be solved.
5. The speed of the guide bottle does not match the speed of the top, and it falls when it enters the top. Adjust the speed to ensure a smooth transition.
Main production: self-adhesive labeling machine self-adhesive flat labeling machine self-adhesive side labeling machine self-adhesive round bottle labeling machine self-adhesive wire labeling machine semi-automatic plane labeling machine filling machine capping machine rolling Cover machine, etc.
Labeling machine labeling deviation and position are not correct to solve the problem
The labeling machine will appear in the process of work - the label deviation and the deviation of the label, the direction of the label and the direction of the product transport are not parallel, the traction wheel slips, the product positioning is not accurate, the product error, etc., which is always attributed to the deviation. Question, how do you know the problem and solve it correctly?