The mesh belt dryer is a commonly used continuous drying equipment. It is generally composed of a material conveying mechanism and one or several separate drying chambers. The material is driven by the conveying mechanism to move in the drying chamber, and the hot air penetrates the material layer to evaporate the water. To achieve the purpose of drying. Each drying chamber consists of a box, heating system, hot air circulation fan, exhaust system and so on. Chinese medicine decoction special mesh belt dryer technical characteristics Technical characteristics: Lysine Aspirin,Indomethacin Capsules,Analgesic & Antipyretic,Diclofenac Injection Uses NINGBO VOICE BIOCHEMIC CO. LTD , https://www.medicine-voice.com
Based on its many years of experience and on the basis of absorbing advanced technology, Changzhou Xinma Drying Co., Ltd. has improved the principle and structure of the original multi-layer belt dryer in order to better meet the requirements of GMP standards. It can meet the drying requirements of traditional Chinese medicine decoction pieces; it mainly has the following characteristics:
1. Increase the contact area between the material and the hot air, and improve the drying speed. Compared with the original multi-layer belt type, it avoids the wind when the hot air continuously passes through the multi-layer mesh belt and reaches the upper humidity of the Zui. The temperature is low and the humidity is large, which reduces the drying efficiency of hot air.
2. The advantage of the heat exchanger is that the belt machine adopts this structure.
a, dry air temperature is easy to control, which is extremely important for drying different types of materials;
b. The air temperature throughout the cabinet is relatively uniform to avoid the phenomenon of excessive local temperature;
c, the heat exchanger is easy to overhaul, and the access door is extremely important for the heat exchanger;
d. Install a ash screen on the air inlet side of the heat exchanger for regular cleaning to avoid the inclusion of debris from the circulating hot air into the blades of the radiator and the fan, causing blockage of the radiator or damage of the fan blades;
e. Improve the penetration of hot air.
4. With the machine in the working state and the outside world without hurricane phenomenon, and to ensure that the equipment is easy to clean when there is no water seepage in the insulation layer, to ensure the cleanliness of each drying item.
5. Adopt basic fully enclosed structure to ensure material is not polluted, improve thermal efficiency and improve working conditions.
6. The unique internal air supply device (such as: uniform air plate and layered air supply structure) not only improves the relative speed of materials and hot air, but also improves the drying speed and ensures uniform and uniform material drying.
7. There are access doors on both sides for easy access to all parts of the dryer for easy cleaning of the inside of the main unit.
8. There are a number of drying units in the unit. The temperature of each unit can be controlled automatically by the solenoid valve, and there are digital displays. The operability of the equipment is greatly improved.
9. All key components are made of domestic and foreign well-known manufacturers to ensure long-term normal operation of the equipment.
10. The speed of the mesh belt is controlled by frequency conversion. The speed of the mesh belt can be visually displayed on the electrical control box, and the final moisture of the material can be effectively controlled.
11. All air inlets are equipped with medium efficiency filters to ensure clean air.
12. All circulating fans are centrifugal fans with low energy consumption, large head and high hot air penetration.