STANDARD PACKAGING
Other weight also available.
COLOR: yellow, orange ,pink ,green,blue,red Household Gloves,Kitchen Rubber Gloves,Household Rubber Gloves,Kitchen Gloves For Washing Dishes Jiangsu Asbao Medical Technology Co., Ltd. , https://www.iigloves.com
1pair/opp bag; 12pairs/big bag; 12 or 20dozens/carton (144 or 240pairs/carton) for household latex
Delivery Time Delivery 30-45 days after receipt of advance payment
Application of Latex household gloves These household Latex Gloves are widely used in light industry, agricultural, sanitation, sanitation departments and daily life to protect hands
Feature of Latex household gloves :
1,Low in water-soluble proteins, no chemical residue, harmless to human bodies;
2,Puncture resistant, tear resistant, blade cut resistant and abrasion resistant;
3,As a reusable product, just rinse in clean water after each use and air drying;
4,Storage of Latex household gloves : Store the glove in its original packaging protected from direct sunlight, far from heat sources;
5,Shelf Life of Latex household gloves : 3 years from the manufacture date under proper storage condition.
household latex gloves. Weight 30g-85g per pair.
SIZE S, M, L, XL
Huayu Brothers ice machine flake ice machine installation steps
Huayu Brothers ice machine flake ice machine installation steps
Huayu Brothers ice machine flake ice machine installation steps installation steps
First, the air-cooled split ice machine
1, machine size and installation site, please refer to the technical parameters of each machine or with us
2. Installation of machinery and equipment: After installing the refrigeration unit and the ice-making part of the ice bucket, fix the unit with the same diameter of the liquid supply pipe and the return pipe respectively; connect the pipe with nitrogen gas after connecting the pipe After confirming the leak in the good pipeline section, the nitrogen is vented, and the connected welded pipe and the ice bucket are evacuated by the vacuum pump; after the vacuum is exhausted, the ball valve is connected to the system.
3, water system installation: water supply pressure requirement of 0.1-0.5MPa is better; connect the water source to the water inlet of the ice machine, the overflow of the water tank is connected to the place where the water can be drained by the water pipe, and the drain port is only used when cleaning the water tank. .
4, the main power supply installation: the equipment power supply is a three-phase five-wire system, three fire lines, a zero line, a ground line, according to the line mark, connected to the power supply; if the device can not start, you can put three phases After any two phase lines of the line adjust the phase sequence, the running device is started again.
Note: Before starting the ice machine, you must ensure that the compressor oil and refrigerant have been added.
Second, the air-cooled whole piece of ice machine
1, machine size and installation site, please refer to the technical parameters of each machine or with us
2, machine equipment installation: put the ice machine above the ice storage, and confirm that the ice exit is aligned with the ice storage center of the ice storage
3. Installation of water system: the water supply pressure requirement is 0.1-0.5MPa; the water source is connected with the water inlet of the ice machine, and the overflow pipe on the water tank is connected to the place where the water can be drained. The drain port is only used when cleaning the water tank. .
4, the main power supply installation: the equipment power supply is a three-phase five-wire system, three fire lines, a zero line, a ground line, according to the line mark, connected to the power supply; if the device can not start, you can put three phases After any two phase lines of the line adjust the phase sequence, the running device is started again.
Third, water-cooled flake ice machine
1, machine size and installation site, please refer to the technical parameters of each machine or with us
2, machine equipment installation: put the ice machine above the ice storage, and confirm that the ice exit is aligned with the ice storage center of the ice storage
3. Water system installation: The water supply pressure requirement is 0.1MP-0.5MP. The water source is connected to the water inlet of the ice machine. The overflow port on the water tank is connected to the place where the water can be drained. The drain port is only used when cleaning the water tank. use.
4. Installation of the tower: According to the indication on the machine, connect the cooling tower, water pump and condenser. Pay attention to the direction of the inlet and outlet when connecting. The cooling tower water pump and the power cord of the fan are connected to the corresponding wiring reserved in the electric control box. end.
5, the main power supply installation: the equipment power supply is a three-phase five-wire system, three fire lines, a zero line, a ground line, according to the line marking, connected to the power supply; if the equipment can not start, you can three phases After any two phase lines of the line adjust the phase sequence, the running device is started again.
Third, maintenance
1. Condenser cleaning: Ice machine with air-cooling heat dissipation type. Under normal circumstances, the condenser fins need to be cleaned for one month. The specific cleaning time period depends on the air cleanliness of the working environment of the equipment and the frequency of use of the machine. . Keeping the condenser clean can keep the equipment running at a good state, reducing energy consumption and extending service life.
2, water tank, water tray cleaning: water tank, water separator for a long time work, in the water tank and the inside of the water tray will produce scale, sediment, bacteria and other production of sheet ice will be contaminated, so need to use regularly Acids such as vinegar are washed and then disinfected with a disinfectant to ensure the sanitation and cleanness of the tank.
3 Maintenance of the reducer: Check regularly whether the reducer bolt is loose and the running rotation is smooth and stable.