Rat renal corticotropin releasing hormone (CRH) ELISA kit instructions

Rat renal corticotropin releasing hormone (CRH) ELISA kit instructions

·This kit is used for quantitative determination of rat corticotropin-releasing hormone (CRH) in serum, plasma, tissue, cell supernatant and related liquid samples in vitro.
· Validity period: 6 months · Storage conditions: 2-8 ° C

Experimental principle of rat corticotropin releasing hormone (CRH) ELISA kit

The kit uses a double antibody one-step sandwich enzyme-linked immunosorbent assay (ELISA). The coated microcapsules, which were previously coated with human visfatin (Visfatin) capture antibody, were sequentially added with specimens, standards, and HRP-labeled detection antibodies, and were incubated and thoroughly washed. Using the substrate TMB to develop color, TMB is converted to blue under the catalysis of peroxidase and converted to the final yellow color by the action of an acid. The color depth is positively correlated with the human visfatin (Visfatin) in the sample. The absorbance (OD value) was measured at 450 nm using a microplate reader to calculate the sample concentration.

Rat corticotropin releasing hormone (CRH) ELISA kit sample processing and requirements

1. Serum : Whole blood samples should be placed at room temperature for 2 hours or 4 °C overnight, centrifuged at 1000g for 20 minutes, the supernatant can be detected, or the specimens can be stored at -20 ° C or -80 ° C, but should be avoided repeatedly melt.
2. Plasma : EDTA or heparin can be used as anticoagulant. The specimen should be centrifuged at 2-8 °C for 1000 minutes within 20 minutes after collection, or the specimen should be stored at -20 °C or -80 °C, but repeated freezing and thawing should be avoided. .
3. Cell culture supernatant or other biological specimens : centrifuge at 1000g for 20 minutes, take the supernatant to detect, or store the specimen at -20 °C or -80 °C, but avoid repeated freezing and thawing.
Note: Specimen hemolysis will affect the final test results, so hemolysis specimens should not be tested.

Reagents and equipment that are needed but not provided

  • Microplate reader (450nm)
  • High-precision sampler and tip: 0.5-10uL, 2-20uL, 20-200uL, 200-1000uL
  • 37 ° C incubator
  • Distilled or deionized water

Precautions

  • Incubation is carried out strictly in accordance with the specified time and temperature to ensure accurate results. All reagents must reach room temperature 20-25 °C before use. Store the reagents refrigerated immediately after use.
  • Incorrect cleaning can result in inaccurate results. Make sure to drain the liquid in the well as much as possible before adding the substrate. Do not let the micropores dry during the incubation process.
  • Eliminate residual liquid and fingerprints at the bottom of the board, otherwise it will affect the OD value.
  • The substrate coloring solution should be colorless or very light, and the substrate liquid that has turned blue cannot be used.
  • Avoid cross-contamination of reagents and specimens to avoid erroneous results.
  • Avoid direct exposure to strong light during storage and incubation.
  • After balancing to room temperature, the sealed bag is opened to allow water-repellent drops to condense on the cold slats.
  • Any reagents should not be exposed to strong gases emitted by bleaching solvents or bleaching solvents. Any bleaching component will destroy the biological activity of the reagents in the kit.
  • Cannot use expired products.
  • If the disease is likely to spread, all samples should be managed and the sample and test device processed in accordance with the prescribed procedures.

Reagent preparation

The kit should be taken out of the refrigerated environment and should be balanced at room temperature before use.
Dilution of 20× Wash Buffer: Distilled water was diluted 1:20, ie 1 part of 20× Wash Buffer plus 19 parts of distilled water.

Steps

  1. The required slats were taken out from the aluminum foil pouch after equilibrating for 20 min at room temperature, and the remaining slats were sealed back to 4 ° C with a ziplock bag.
  2. Set standard and sample wells, standard wells with different concentrations of standard 50μL;
  3. Add 50 μL of the sample to be tested to the sample well; blank holes are not added.
  4. In addition to the blank wells, 100 μL of horseradish peroxidase (HRP)-labeled detection antibody was added to each well of the standard well and the sample well, and the reaction well was sealed with a sealing plate, and incubated at 37 ° C in a water bath or incubator for 60 min.
  5. Discard the liquid, pat dry on the absorbent paper, fill each well with the washing solution (350 μL), let stand for 1 min, remove the washing solution, pat dry on the absorbent paper, and repeat the washing 5 times (can also be washed with a washing machine) .
  6. 50 μL of each of the substrates A and B was added to each well, and incubated at 37 ° C for 15 min in the dark.
  7. 50 μL of the stop solution was added to each well, and the OD value of each well was measured at a wavelength of 450 nm within 15 min.

Experimental result calculation

The OD value of the tested standard is the abscissa, the concentration value of the standard is the ordinate, the standard curve is drawn on the coordinate paper or with the relevant software, and the linear regression equation is obtained, and the OD value of the sample is substituted into the equation to calculate the sample. concentration.

Kit performance

  • Detection range: 3.75 ng/mL – 120 ng/mL.
  • Sensitivity: The minimum detection concentration is less than 0.1 ng/mL.
  • Specificity: Does not cross-react with other soluble structural analogs.
  • Repeatability: The intra-plate variation coefficient is less than 10%, and the inter-plate variation coefficient is less than 15%.

Rat Corticotropin Releasing Hormone (CRH) ELISA Kit Related Products Recommended:

Human bombesin (BBS) ELISA kit

Mouse progesterone (PROG) ELISA kit

Porcine haptoglobin/haptoglobin (Hpt/HP) ELISA kit

Canine Neuron Enolase (NSE) ELISA Kit

Bovine Foot and Mouth Disease O Type (FMD-O) elisa kit

Fish fructose-1,6-bisphosphatase (FBP) ELISA kit

Canine thrombin antithrombin complex (TAT) ELISA kit

Bovine Pasteurella Antigen ELISA Kit

Fish insulin-like growth factor 2 (IGF-2) ELISA kit

Human Interleukin 10 (IL-10) ELISA Kit

Mouse T cell activation connexin (LAT) ELISA kit

Sheep type I collagen (ColI) ELISA kit

Human thyrotropin receptor antibody (TRAb) ELISA kit

Monkey Immunoglobulin M (IgM) ELISA Kit

Fish luteinizing hormone (LH) ELISA kit

Mouse tryptophan-2,3-dioxygenase (TDO) ELISA kit

Mouse IL-1 Receptor Antagonist (IL1Ra) ELISA Kit

Rat Interleukin 8 (IL-8) ELISA Kit

Hamster Very Low Density Lipoprotein (VLDL) ELISA Kit

Plant metallothionein (MT) elisa kit

Human neural chemotactic protein (fractalkine/CX3CL1) ELISA kit

Mouse neonatal thyroxine (NN-T4) ELISA kit

Human phosphorylated H2AX antibody (S139) ELISA kit

Human immunoglobulin GFc segment receptor II (FcγRII/CD32) ELISA kit

Human pan-connexin 1 (PANX1) ELISA kit

Tylosin ELISA Kit (Quantitative)

Human niacinamide adenine dinucleotide (NAD) ELISA kit

Mouse Glycosylated Protein (GSP) ELISA Kit

Mouse Apoptosis Related Factor Ligand (FASL) ELISA Kit

Human dengue virus IgM antibody ELISA kit (qualitative)

Rat prostaglandin F2a (PGF2a) ELISA kit

Rabbit Coagulation Factor II (FII) ELISA Kit

Rabbit Lectin-Like Oxidized Low Density Lipoprotein Receptor 1 (LOX1) ELISA Kit

Mouse surface membrane immunoglobulin A (mIgA) ELISA kit

Rat platelet factor 3 (PF-3) ELISA kit

Mouse insulin receptor (ISR) ELISA kit

Rat ovalbumin-specific IgG (OVA-sIgG) ELISA kit

Canine ubiquitin (Ub) ELISA kit

Rat Parathyroid Hormone (PTH) ELISA Kit

Plant Coenzyme A (CoA) elisa kit

Human epoxide hydrolase (EH) ELSIA kit

Human avidin/heparin binding protein (AZU/HBP) ELISA kit

Rat renal corticotropin releasing hormone (CRH) ELISA kit , please contact our sales customer service hotline--021-60520062, 18721729907 QQ, welcome your inquiry, request for instructions, inquiry message form, telephone, online Customer service QQ, send emails. Keshun Bio is a professional high-quality Elisa kit, production, supplier, we will be sincere, please rest assured to buy! Note: All products of the company are for scientific research only and should not be used for clinical purposes.

Imported Premium Fire Retardant

Flame retardants, functional auxiliaries endowed with inflammable polymer flammability, mainly designed for flame retardancy of polymer materials; There are many types of flame retardants, which can be divided into additive flame retardants and reactive flame retardants according to their usage.

The additive type flame retardant is added to the polymer by mechanical mixing method to make the polymer flame retardant. At present, the additive type flame retardant mainly includes organic flame retardant and inorganic flame retardant, halogenated flame retardant (organic chloride and organic bromide) and non-halogenated flame retardant. Organics are some flame retardants represented by bromine, phosphorus and nitrogen systems, nitrogen systems, red phosphorus and compounds, while inorganic flame retardants are mainly antimony trioxide, magnesium hydroxide, aluminum hydroxide and silicon systems.

Imported Premium Fire Retardant,Flame Retardant Cresyl Diphenyl Phosphate,Plasticized Flame Retardant,Flame Retardant Abs

Xingbang High Molecular Materials Co., Ltd. , https://www.chemicaladditive.com