Plant extracts refer to substances extracted or processed from plants (all or a part of plants) with appropriate solvents or methods, which can be used in pharmaceutical industry, food industry, daily chemical industry and other industries. Nowadays, the application range of plant extracts has been very wide. In addition to traditional Chinese medicine products, with the gradual increase of people's trust and reliance on natural products, a large part of plant extracts have been used in health care products and food ingredients. In addition, plant extracts have been used in cosmetics and feed in recent years. Andrographis Paniculata Extract,Hydrocotyle Asiatica Extract,Icariin,Reishi Mushroom Extract,Maca Root Extract Xi'an Gawen Biotechnology Co., Ltd , https://www.amulyn-bio.com
Ice machine installation instructions and precautions
After receiving the ice machine , the user should install and debug according to the equipment manual. Do not operate it. Regarding the installation instructions of the ice machine and its precautions, the small series summarizes the following points:
1. Placement environment location
(1) The ice machine should be placed in a place where air is circulated and cleaned around.
(2) The ice machine should not be placed in the open air, and should not be exposed to direct sunlight or rain. You can't get close to the heat source around.
(3) The environment in which the machine is used must not be lower than 5 ° C and not higher than 38 ° C.
(4) There should be enough space around the machine. It is recommended that the back of the device should not be less than 250mm. So that the machine is cooling.
(5) Please adjust the anchor screw on the bottom of the machine to ensure the level of the machine is stable.
2. Installation of water system (for edible ice machine)
(1) Please connect the water source that meets the local drinking water standard.
(2) Attach a filter if necessary to increase the drinking standard of water.
3, the installation of the power supply
(1) The power supply must be the same as indicated on the machine nameplate.
(2) Must be reliably grounded, the grounding wire must meet electrical standards.
(3) The voltage fluctuation shall not exceed ±10% of the rated voltage.