Dishwash Liquid,Dish Washing Soap,Dish Washer Detergent,Kitchen Dishwashing Liquid Detergent Wuxi Keni Daily Cosmetics Co.,Ltd , https://www.kenicosmetics.com
Inflated by the specified air pressure If the tire pressure is too high, the contact area with the ground decreases, the tread wears easily, the tire's cushioning force weakens, and the vibration increases. When a large bump is encountered, it may even cause a puncture. If the air pressure is too low, the tire is easily deformed, the rolling resistance is increased, the tire cord is easily delaminated or broken, and the tire is also prone to heat and aging.
Periodically transposition, the tires will be transposed in accordance with the regulations on a regular basis, which can prevent the tires from being worn out, and the spare tires should also participate in transposition.
Keep tires clean to avoid contact with oil, alkali, acid and other substances. Always flush dirt on tires to keep them clean.
Do a good job with the car maintenance tires should be carried with the car. After the locomotive has been working for a period of time, check the tire pressure and temperature. Every time before leaving the vehicle, check the appearance of the rim, the condition of the valve, and the necessary tire repair tools.
Do not increase the load weight arbitrarily when the load is moderate. When the load exceeds the maximum load capacity of the tire, the service life of the tire will be shortened.
Starting, shifting and braking without excessive force will not only increase the deformation of the carcass, but will also cause severe friction between the tread and the ground, especially if the road conditions are poor.
Avoid using cold water to cool the tires when the car is overheating, avoid splashing cold water to the tires, or easy to damage the tires. The correct way is to park the locomotive in the shade to cool it down naturally.
Anti-long-term sun and rain tires suffer long-term sun and rain, will accelerate tire aging deterioration. For long-term parking, the vehicle should be parked in a dry, cool garage and the frame should be erected with wooden stakes or brackets to keep the tires off the ground.
Agricultural vehicle tire care and maintenance?
When installing the inner tube correctly, be careful not to bring sand, granular hard objects and oil impurities into the tire. It is better to apply a layer of light wax or a layer of talcum powder on the inner wall of the tire and the surface of the inner tube to reduce Small friction prevents the inner tube from being scratched. When the inner tube is inflated, inflate and tap the tread with the hammer so that the bead and the rim are in close contact with each other. In addition, the inner tire valve must be aligned with the valve aperture on the steel ring to prevent tearing of the inner tube.