Fault analysis of high table semi-automatic baler: 1. No action when inserting the belt, the upper limit switch (LS1) of the upper slide plate is faulty or the shrapnel is blocked by foreign objects, and the contact point cannot be touched. 2. Continuous operation, limit switch (LS5) failure. There is no closed circuit at the contact, so the power is continuously opened as soon as the power is turned on. 3, un-tightened, cut off the machine tightly adjusted too loose, tighten some; adjust the limit switch (LS3 and LS5); retract the magnetic induction switch failure Application The baler is suitable for the packaging of various sizes of goods, such as books and magazines, cartons, postal parcels and other items. Technical parameters Packing speed: 1.5sea/strap
The baler is a semi-automatic strapping machine, which can automatically complete the strapping process of the belt, heat sealing, cutting and stripping after inserting the packaging belt, and can automatically stop. It is redesigned and manufactured on the basis of foreign prototypes. It can be used in a wide range of applications. No matter the size of the package, the machine can be packaged without mechanical adjustment. Some parts are imported, the blade is stable and reliable, and the adjustment is convenient.
Minimum package: 60mm
Maximum tightening force: 60Kgs
Maximum packing: Any Packing PP belt width: 5mm-15mm
Power supply: 220V (50/60Hz)
Drive motor: 220V 220W
Packing machine volume: 890 × 570 × 730mm
Packing machine weight: 100K