First, build a greenhouse. First dig a pit 1.8-2 meters deep and 4-5 meters wide, depending on the length, and put it into a solid bed frame. Above the bamboo slats and thin film arched shed, surrounded with soil compaction, covered with grasshoppers. There are about 30 centimeters of air vents left to the east, west, and north, and small gates to the east for access. Second, the ingredients inoculated. The formulation of the culture material is: cotton husk 100 kg, water 120 kg, plaster 1 kg, carbendazim wettable powder 0.1 kg. After mixing, pile up the fermentation. Then, inoculate the sterilized house. Polypropylene plastic bags were used to fill the material. The specifications were 28 cm, 55 cm and 0.03 cm. Four-layer inoculation was used and the inoculation volume was 15%. Put a hole in the bag or insert a straw in the tie. Third, the row of bacteria. Put the kind of bacteria bag in a well-insulated room. When the room temperature is slightly lower, 5-6 layers are stacked, and when the room temperature is high, 3-4 layers are stacked. Return the bag every 5-6 days. Always check the inside temperature to prevent high temperature burns. The room temperature is controlled at about 20°C, and the mycelium can be filled in 20 days. Fourth, strengthen management. The mycelium bags of good mycelium will be timely moved into the greenhouse and discharged on the solid bed frame. A 4-meter-wide greenhouse can contain 3 rows of bed frames and 9-10 layers of bacteria bags in each row. After setting up, strengthen ventilation and adjust the temperature difference between day and night. The management of mycelium growth and development stages is mainly to regulate temperature, moisturize and prevent contamination of bacteria. To prevent contamination with germs, room temperature should be controlled below 15°C within 10 days after sowing. Two days after sowing, the strains began to germinate and gradually grow around. At this time, the temperature changes in the culture materials were checked several times a day, and the temperature of the materials was controlled to be below 30°C. If the temperature of the material is too high, the film should be opened and ventilated to cool it. After the temperature drops, it is covered with a film. After the material temperature stabilizes, it is not necessary to tilt the film. The fruiting body primordia can be formed in 4-6 days. After 10 days, the mycelium grew over the material surface and grew into the material layer. At this time, the room temperature could be increased to 20-25°C. Contaminated with bacteria, lime powder may be sprinkled on the growth of the bacteria or rubbed with 0.3% carbendazim. During this period, the relative humidity of air was kept at about 65%. During the mulberry period (Pleurotus ostreatus double-core mycelium reaches a physiological maturity after a period of growth and development, encountering suitable conditions of temperature, humidity, light, ventilation, etc., to form a cluster of granular buds such as mulberry-like, called "Mulberry phase ") Open the bag mouth, spray water on the ground or on the wall, maintain the relative humidity of about 90%, to the coral period (a few days after the mulberry period, grow into a staggered short stipe, shaped like a cap, called "coral period ") Put away your pocket so that you can get it out smoothly. Fifth, timely harvest. The optimum harvest period of Pleurotus ostreatus is that the cap is basically unfolded, and the color changes from dark gray to pale gray or grayish white. When spores are about to be ejected, Pleurotus ostreatus is harvested and the mushroom body is hypertrophic, yield is high and the flavor is beautiful. Harvesting method: Use your left hand to hold the culture material. Hold the stipe in your right hand and gently twist it. A knife can also be used to cut off the material at the base of the stipe. Take a large flower and leave a small flower, under normal circumstances, sowing once can harvest 3-4 batches of mushrooms. After each harvest, the dead mushrooms and stipe on the surface of the bed must be cleaned to prevent the production of rotten mushrooms. Cover the membrane, stop spraying for 4-5 days, then spray less water to keep the surface wet. After about 10 days, the buds again grew on the material surface. Still managed according to the first batch of mushroom management methods. Iridology Camera Health Analyzer Iris Iriscope Iridology Camera:
Iris holographic diagnostics is a kind of knowledge that applies non-drug and natural therapy to analyze and care for the body by analyzing the iris and pupil to analyze and regulate the health condition of the body. In the field of health medicine, it is called non-invasive health testing and non-drug health intervention. It is a traditional clinical health medicine in Europe.
Iris Iriscope Iridology Camera System Functions:
Iridology Camera,Usb Iridology Camera,Iriscope Iridology Camera,Iridology Camera Eye Iriscope Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.szlighttherapymachine.com
1. Adjust brightness through either software or switch on handle line, delete the photos, and adjust the focus, quick fixed photos with white balance and high stability of colors. Connects directly with computer without outside power and easy to operate.
2. The software can save the client information and irises also the details of products that you recommend them. After taken the photos, you can analysis the irises and later compare the irises pictures when your client comes back to see their progress. Can print an analysis report. Save the photos according to the date & time you take the photos.3. This machine will help the client know his health condition, including the problem which you have had in the past. The Iridology will be your health counselor, tell you how to keep away from the illness.
Iris Iriscope Iridology Camera Specification:
* Nice appearance and innovative design
* LED illuminator around lens
* Imported lens with plated layer
* 12MP high resolution CCD sensor
* Special DSP image processor, Optical Image Stabilizer
* Single capture button and digital pause capture.
* Adjustable focus to give clear image.
* Auto white balance and contrast adjustment, Color Temperature Filter
* Compatible with iris lens, hair lens.
* Deliver clear and accurate images.
* Easy to operate.
* OS: Windows XP, WIN2000, 2003, Vista, Win7. Win8,win 10
What is the primary benefit of photo iridology?
Not only does it bring clues to your iridology analysis, but it helps to create a better connection with your patient. The patient, who`s naturally curious, is eager to see their own iris. With some simple explanations they can get a basic understanding of your analysis. The connection with your patient strengthens and their understanding of their process improves.
* Iris analysis system: international technology, unique functions.
* Iris analysis system is a medicinal tool that checks the body conditions and prevents diseases from occurring.
* We brought in the advanced iris analysis technology from Germany to lead people to discover sources of illness, and care the body health and spirit in anyways.
* The instrument can show the body conditions of customers and suggest customers the suitable health food, and the plans to care their bodies.