A few days ago, the weather was getting colder and colder. The cold winter was about to come. Leaves on the roadsides were falling down. Cold winds hit the streets. The clutter of the streets was how these dead leaves effectively dealt with people who had been troubled. The commonly used methods of treatment are: incineration and deep burial. These two methods are not only time-consuming, but also cause pollution and damage to the environment. How to deal with it better? Fermenting it into organic fertilizer not only effectively treats these litters, but also serves as a waste, killing two birds with one stone. The specific approach is as follows: 1. Prepare the material. Litter crushed first, 1 to 1.5 tons of litter, fresh material about 2.5 to 3.5 tons, with 1 kg of Kinpo Fertilizer starter. It is necessary to first mix the Fertilizer Fertilizer with rice bran (or corn flour, wheat bran) in a ratio of 1:5 to 10 for use. Recommended reading MD sole is a kind of material which has
the characteristics of light, elastic and anti-seismic performance.Also
called PHYLON base.The hardness is controlled by the foaming
temperature.Can reduce foot burden. Green Safety Sneakers,Sport Style Shoes,Md Sole,Mesh Upper Sneaker Greateagle Safety Products Co., Ltd. , https://www.greateaglesafety.com
2, adjust C/N. The C/N ratio of the fermented organic fertilizer material should be maintained at 25 to 30:1. Since the C/N of fallen leaves and subtilis is too low, it should be adjusted. Therefore, one ton of litter and defoliation should add one kilogram of urea (or add 100 pounds of livestock manure).
3, control the moisture. The litter moisture content should be controlled at 60 to 65%. Judgment of moisture: The hand grabs a handful of material, fingers see the watermark but not drip, landing is appropriate. Slow water fermentation, poor ventilation, and water can also lead to "corrupt bacteria" work and produce odors.
4, build reactor requirements. The ready-made materials shall be built on the side of the heap. The stack height and volume shall not be too short or too small. Requirements: The stack height is 1.5 meters, the width is 2 meters, and the length is 2 to 4 meters or more.
5, temperature requirements. The starting temperature is better than 15 °C (four seasons can work, not affected by the season, the winter as much as possible in the indoor or greenhouse fermentation), fermentation temperature control at 70 ~ 75 °C is appropriate.
6, overturn oxygen supply. The golden babe fertilizer fermentation agent is in need of good (consumption) oxygen fermentation, so during the operation it should be increased oxygen supply measures, so that mix well, diligent turning, ventilation is appropriate. Otherwise it will cause anaerobic fermentation and produce odor, affecting the effect.
7, the completion of fermentation. Generally, after the material is accumulated for 48 hours, the temperature rises to 50-60° C. On the third day, it can reach 65° C. or more. It should be turned over once at high temperatures. Under normal circumstances, there will be two high temperatures above 65° C. during the fermentation process. , Twice can complete the fermentation, normal fermentation can be completed within a week. The material was dark brown and the temperature began to fall to room temperature, indicating that the fermentation was completed.
After the litter is fermented by the golden babe fertilizer starter, it can completely deodorize, “combineâ€, “destroy†and “sterilizeâ€. The organic fertilizer fermented is not only effective but also safe and convenient to use. But also has the effect of promoting disease resistance, promoting fertility, improving fertilizer utilization, and improving the utilization of chemical fertilizers. It is really a multifold process, and it is currently the most effective method to deal with litter. In addition, litter can also be fermented into a good nursery substrate. Details can be consulted: Beijing Huaxia Kangyuan Technology Co., Ltd. Tel Toll Hotline Taobao Buy Click
1, Kinpo Fertilizer Fertilizer Treatment City waste shows efficacy
2, Goldfish Fertilizer Fermentation Agent to solve the difficult problem of Chinese medicine slag treatment
The medium base of general
shoemaking, and the mixed substance made of EVA foaming with heated
compression (EVA secondary high-pressure molding)
When the sole is
too hard or too thin, the impact of the ground directly on the foot,
making the foot prone to fatigue and strain.MD sole is soft and elastic,
so it can disperse the impact evenly. The weight of the shoe increases
by 1 gram, which is equivalent to adding a few dozen grams of weight to
the person's back.As a result, you can choose lightweight and flexible
shoes to reduce your physical burden.