Blackhead Suction Tool,Best Blackhead Remover,Electric Blackhead Remover,Best Blackhead Suction Remover Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizon.com
1. High temperature burns, hot and cold impact test chambers have high temperature inside the box during high temperature test. During the test or just after the test, if you need to open the box, you should take special care to open the door. Remember to walk along the direction in which they are opened to avoid burns.
2, low temperature frostbite, hot and cold impact test chamber when the low temperature test is carried out, the temperature inside the box is very low. During the test or just after the test, special care should be taken to open the door to avoid frostbite.
3, high temperature burns, hot and cold shock test chamber during the high temperature test, the temperature inside the box is very high. During the test or just after the test, special care should be taken to open the door to avoid burns.
4, electric shock, although the equipment has a sound anti-shock measures, but still need to pay attention, especially the electrical control system, under working conditions, do not touch the electrical parts.
Thermal shock test chamber installation safety information:
1. Power supply (1) The high and low temperature test chamber power supply uses three-phase five-wire system, and the equipment cable is four-core cable, three phase wires, and one neutral wire. Please pay attention to the zero line distinction. Due to the partial load of the equipment and the control system being single-phase, connecting the wrong neutral line will result in the equipment not working and being damaged.
(2) The grounding wire of this equipment has a grounding wire column to ensure that the equipment is well grounded to make the equipment safe and reliable. A wrong connection between the neutral and ground wires will cause the device to work abnormally.
(3) If the cable needs to be extended due to factors such as the user's site, please ensure that the rated parameters of the extension cable and power supply used can meet the power requirements of the product.
2. Site (1) A large amount of heat will be generated during the use of this equipment. Keep the device in a well ventilated area.
(2) Do not use the device near flammable materials or in an explosive atmosphere.
(3) Do not use in strong magnetic fields and strong vibration environments.
Use security information:
1. Do not connect the tester power to the device power supply, otherwise it will increase the power load of the device. Unless the device has a test power connector.
2. It is strictly forbidden to test flammable, explosive, highly corrosive and strong radiation items.
3. Do not carry or overhaul the equipment while it is powered on or during operation.
Safety precautions when using the thermal shock test chamber
Threatening personal safety information: