Roller Needle,Cosmetic Roller Needle,Non-Reusable Roller Needle,Disposable Medical Microneedle Changzhou Timerein Biotechnology Co. , Ltd. , https://www.timereinbiotech.com
Round bale baler use precautions
1. Before using the baler, it must be adjusted as necessary, including: winding mechanism, height of the pickup, gap between the pickup and feed roller, tension of the bale, etc., check whether the operation of each component is normal If there is any abnormality, it should be overhauled. 2. When the hydraulic pipe of the baler is connected with the hydraulic output end of the tractor, check whether there is leakage in the hydraulic pipe. It is forbidden to insert and remove the oil pipe under pressure in the hydraulic pipe. 3. During the use of the baler, it is strictly prohibited to pick up the springs of the picker. Observe the working status of the baler and follow the instruction manual. Special attention should be paid to: when the bale reaches the setting requirements and the rope winding mechanism starts working To immediately stop the car, and control the throttle to remain unchanged, so that the power output shaft continues to rotate, baling and binding, the strapping work is completed, the baler opens the back door of the forming room to remove the bale, and complete the bale binding work. 4. When the bundling machine encounters a blockage during operation, the engine must be shut down and the power must be removed before it is removed. When the tying machine unloads the bale, it is forbidden to stand behind to avoid crushing or bumping. 5. When the bundling machine is being repaired and maintained, the engine power output must be cut off. 6. Tractor traction bundling machine driving on the road, pay attention to traffic safety, ensure that the power output is cut off.