Quantum Resonance Magnetic Analyzer:
The electromagnetic wave signals emitted by the human body represent the specific state of the human body, and the emitted electromagnetic wave signals are different under the different conditions of the human body, such as health, sub-health, disease, etc. If we can determine these specific electromagnetic wave signals, we can determine the status of the body's life.
The Quantum Magnetic Resonance Analyzer replaces the need for ultrasonic, nuclear magnetic resonance or radiography for various health related conditions. Holding sensors in your palm simply, health data will be collected within minutes from various body systems. The magnetic resonance analyzer offers new advantages in the field of material analysis. It has been shown that the applicability of such an analyzer exceeds the range of tissue analysis and other medical applications. The magnetic resonance analyzer measures the degree and type of response of a matter under test, and by comparison with reference matter it assists in recognizing deviations from the desired response. The software interface has updated high technology that the operation is more convenient and faster. The main future is 2 languages in software in one machine, both with English and another language.
Quantum magnetic resonance analyzer collect the weak magnetic field sensors of frequency and energy from human body through the hand grip sensor. Through the instrument magnifies and the computer processing ,compare with the disease set up inside the instrument install and standard quantum resonance spectrum, use the Fourier analysis method analysis if the sample wave pattern become chaotic.According to the results, make an analytic judgment for the person in state of Sub-health and primal problem, and put forward the standard advice for preventive treatment. Quantum Body Analyzer,918 Quantum Analyzer,Quantum Analyzer Price,Quantum Resonance Magnetic Analyzer,Quantum bioresonance analyzer Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.nirlighttherapy.com
Operation instructions for the paste filling machine
Plaster filling machine installation and commissioning
1. After the machine is unpacked, install it according to the “Installation Diagram†and connect the compressed air source. The pressure of the air source is 0.6MPa. If the main pipe of the compressed air is connected, the valve should be installed first.
2. Open the right door and screw out the oil mister oil mark to add clean special oil, or sewing machine oil. Note: You can't carry air pressure when refueling, and the oil quantity should be increased to 8 points.
3. Check the air supply to check whether the sealing surfaces are leaking. Adjust the air pressure to 0.3~0.4MPa to adjust the oil input. After a few movements, spray a drop of oil and check the fuel injection regularly.
4, filling volume adjustment: first rotate the filling volume to adjust the hand wheel, observe the indicator window scale, so as to achieve the required loading, while adjusting the suction and discharge speed to achieve a satisfactory filling effect, the amount of measurement filling Quantity, corrected the filling amount after zui.
Cleaning requirements for paste filling machines
Thoroughly clean before use, wipe off oil or dirt with a soft cloth and detergent, and then dry with a soft cloth. In accordance with GMP requirements, check whether the contact parts of the equipment and materials meet the corresponding cleaning requirements. If not, re-clean and dry. The cleaning method is based on the process requirements.
Paste filling machine operation and maintenance
1. The filling action of the machine is divided into automatic and manual. When the machine adopts manual, only need to use the bottle mouth to push the contact tongue, then start to suck the material. Do not hold the contact tongue when filling. When automatic is used, the bottle must be placed under the discharge port. When the transfer switch is turned on, the filling will start immediately and the bottle will be replaced in time.
2. When it is found that the metering is unstable during filling, it should be checked that the feed check valve may be caught by debris, resulting in a tight seal and affecting the filling amount.
3. Leakage of the lower part of the cylinder indicates that the piston seal is worn and the seal is required to be replaced.