The cleaning system is suitable for in-situ cleaning of material piping equipment in dairy plants, breweries, beverages and general food plants. Main material: SUS304 and 316L, this equipment consists of alkali tank, acid tank, hot water tank, various pipes and pneumatic valves, pressure transmitter, conductivity meter, platinum thermal resistance and control system, etc. The conveying cleaning liquid is forcedly circulated in the material pipeline and equipment to achieve the cleaning purpose. Therefore, there is no need to disintegrate the pipeline equipment, which can improve the utilization rate of the equipment and reduce the labor intensity of the workers. The specific use of this equipment must be combined with the equipment and piping arrangements of the workers' workshop and the cleaning head. First, the working principle of the cleaning system Wash 3-5 minutes, hot water at room temperature or above 60 ° C; alkali wash 5-10 minutes, 1% - 2% solution, 60 ° C - 80 ° C, intermediate washing 5-10 minutes, water below 60 ° C, sterilization 10 - 20 minutes, hot water above 90 °C. The cleaning flow ensures that the flow rate is actually to ensure the flow rate of the cleaning liquid during cleaning, thereby generating a certain mechanical effect, that is, improving the impact force by increasing the turbulence of the fluid, and achieving a certain cleaning effect. It is a fully automatic CIP cleaning system, which can automatically detect the cleaning liquid. Adding liquid, discharging, displaying and adjusting, it is reliable in operation, high in automation, simple in operation, good in CIP cleaning effect, and thus more in line with modern large-scale fluid medicines. . Hygienic requirements for food processing and production environment requirements. Second, the application of the cleaning system Flexible and versatile: The system can be used for pickling, caustic washing, hot water washing, etc., or it can be cleaned according to the needs of specific cleaning procedures; it can not only clean the equipment effectively, but also control the growth of microorganisms. At the same time, semi-automatic and fully automatic control systems can be configured according to customer requirements. Safe and reliable: concentrated acid and concentrated alkali solution are carried out in buried concentrated acid and concentrated alkali cylinder; the liquid level in the tank is automatically controlled and has overflow protection system; the unique discharge port structure can prevent the cleaning liquid from crystallizing and blocking the tube. road. Economical and reliable: Compared with manual cleaning, the cleaning time is greatly reduced and the working efficiency is improved; the use of cleaning agent and water will be more scientific and reasonable; and the steam consumption is relatively small, so that the purpose of rational use of energy can be achieved; Effectively reduce cleaning costs. Third, the characteristics of the cleaning system Mature PLC control system: years of experience accumulation, so that our program is more perfect, coupled with imported high-quality control components, can ensure long-term, stable work of the system; friendly human-machine interface can shorten the training time of operators, can be intuitive The working status of the key components of the display device; the easy-to-understand help interface can assist the operator in judging and handling a variety of common fault information, so that the device can be restored to a normal state in time.
Due to the irregular characteristics of the pelvic structure, the choice of internal fixation is diverse.
For patients separated symphysis pubis, a 2 or 4 holes, 4.5 or 3.5mm diameter dynamic compression plate or reconstruction plate can be used and fixed with full-thread cancellous bone screws.Another method of fixation is lag screw fixation. In patients with new sacroiliac joint dislocation with a forward approach,firm fixation can be achieved by using 2holes 3.5mm dynamic compression plates through the front of the sacroiliac joint. The posterior approach can also be used to insert 6.5mm lag screws into the sacral wings or hollow cancellous bone screws with interosseous compression for firm internal fixation. If available, the fracture may be fixed with 3.5mm or 4.5mm pelvic reconstruction plates and appropriate full-thread cancellous bone screws.
Pelvic Plate,pelvic fracture treatment,pelvic fracture,pelvis plate Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.medthofixation.com