Beverage mixer six troubleshooting methods

Beverage mixer troubleshooting method
1. The water filter is not full or there is a large amount of bubbles. The inlet pressure of the chilled water is continuously lower than 0.01 MPa, the flow of water is insufficient, the resistance of the inlet pipe is too large or the pipeline is blocked, and the pipeline and the check valve have a leak at the gas stop. The situation is symptomatic, increase the pressure and flow of water, reduce the resistance of the pipeline, calm the water through the cold water tank, and repair the leaks of the pipeline and the check valve.

2. The pump body is running normally, but the pump body is not exhausted from the pump body, and the pump body is injected.

3. The water in the pre-carbonization tank is slowly blocked in the tank, the filter in the water filter is blocked, and the nozzle and filter are cleaned.

4. Solenoid valve can not be opened or opened slowly is a solenoid valve failure according to the solenoid valve instruction manual.

5. The syrup tank does not enter the syrup syrup pump suction, the float ball level meter electrical signal fails; the syrup pump fails, the one-way valve is lost to the syrup pump exhaust, the float ball level gauge check valve is checked, according to the syrup pump manual exclude.

6. LZB-40 flowmeter floats up and down, a large number of bubble pipes in the liquid are seriously leaking; some valves are not closed, check the pipeline and related valves.

PTZ Solar Camera


• 2MP 1920*1080 / 4MP 2592*1520 (Optional)
• 3.5W Power,Solar panel universal adjustment, built-in super capacity battery
• Ultra-low power standby, quick wake up in 0.2 seconds
• PIR Human detection + AI Human shape detection
• High-performance ISP and 1/2.7" progressive sensor, blacklight full color
• Built-in microphone and loudspeaker,support two way audio
• Support Cloud storage and local storage
• APP support Android/IOS
• IP65 waterproof

• Support Integrated installation and Split installation

Solar CCTV PTZ Camera,Home Security Outdoor Camera,Security Outdoor Solar Camera,Solar Camera,Solar CCTV PTZ Camera,Home Security Outdoor Camera,Security Outdoor Solar Camera,Solar Camera,Solar CCTV PTZ Camera,Home Security Outdoor Camera,Security Outdoor Solar Camera,Solar Camera,Solar CCTV PTZ Camera,Home Security Outdoor Camera,Security Outdoor Solar Camera,Solar Camera

Installation and use should be relatively simple, mainly reflected in two aspects: one is that the installation and debugging of the camera itself should be relatively simple, and the other is that the operation of the client should be relatively easy to get started. Regarding the installation location and height, we have chosen a height of about 3 meters as a suitable installation location. This not only ensures good visibility, but also prevents the camera from being easily damaged by people
Bad.
3. To support multiple recording storage modes, not only local storage but also cloud storage should be supported.
Four. In the process of purchasing cameras, it is best not to be greedy for cheap prices and not simply pursue cheap prices. It is necessary to comprehensively consider factors such as the stability and clarity of the camera head. Whether the operation of the camera head is stable is determined by the 40 modules in the middle
The clarity is determined by the image sensor.
5. Because the 40 surveillance camera belongs to an all-in-one machine, the product structure is relatively simple, and there are no complex circuits, so it is very stable during use

PTZ Solar Camera,Solar CCTV PTZ Camera,Home Security Outdoor Camera,Security Outdoor Solar Camera,Solar Camera

Shenzhen Fuvision Electronics Co., Ltd. , https://www.szsolarcamera.com