Automatic vacuum packaging machine operating procedures

The automatic vacuum packaging machine is mainly said that the vacuum chamber of the vacuum packaging machine can be automatically oscillated for the double chamber vacuum packaging machine and the continuous vacuum packaging machine. If the general customer does not explain, the double-chamber vacuum packaging machine will be determined according to the manual pendulum cover. Why is this? Because the price of the automatic double-chamber vacuum packaging machine is relatively high, in fact, it is not very laborious to manually swing the cover, generally there is no need to put it over. The purchase and characteristics of food vacuum packaging machines need to know how to operate. The following is a brief introduction to the operating procedures of the fully automatic vacuum packaging machine.

1. The vacuum of the newly purchased vacuum packaging machine is not enough, generally it is improper operation. Adjust the pumping time relay according to the vacuum requirement. However, in order to ensure the quality of the seal, the degree of vacuum must be not less than -0.06Mbra, otherwise the quality of the seal is not guaranteed, and the electric heating belt will be burned out;

2. Put the required packaged product into a plastic bag and place it in the sealing position. After the packaging bag is placed, the bead (stainless steel strip) on the base of the heating strip must be pressed. Turn on the power switch, work on the vacuum pump, and vacuum the packaged items;

3. Turn off the power switch immediately after the equipment stops working, so as to prevent the solenoid valve from being burned for a long time;

4, according to the packaging material to adjust the heat sealing relay, control heating time, generally set in 1.5-2 seconds;

5. The power must be cut off during any maintenance of the pump, and no accidents can occur.

6, the vacuum packaging machine for long-term use attention points, must regularly check the oil level, if the oil level is lower than the oil window mark, it should be refueled to the mark;

7. The working room should be kept clean, especially under the heat seal and the top of the silicone strip, and no foreign matter should be adhered to avoid affecting the quality and service life of the seal;

8. Adjust the cooling time relay according to the sealing quality and packaging materials to achieve a good sealing effect;

9. Then, the plastic bag is sealed by heating and pressing at the same time, then the vacuum chamber is cooled back to the air, and the cover of the studio rises to the other side. The studio cover fell. Complete a seal;

10. During the work or handling process, the packaging machine should always be in the up position, not allowed to be tilted, and it is strictly prohibited to collide or impact, especially instruments, switches, etc. In fact, for the automatic vacuum packaging machine, we must have after purchase Specialized personnel operate, so our manufacturers must develop appropriate safety operating procedures, train specialized operators, and require all personnel to operate in accordance with the operating procedures.

The operating procedures of the fully automatic vacuum packaging machine described above are aimed at different vacuum packaging machines. In fact, the operation of the vacuum packaging machine is similar. The vacuum packaging machine is easy to operate for other large machines.