Automatic rotary bottle unscrambler product features

The fully automatic rotary bottle unscrambler introduces international advanced technology, specially designed for the flushing of the canned capping three-in-one machine, and the bottle-discharging machine arranges the disorderly empty bottles in an orderly manner through the wind-conveying machine of the hanging bottle mouth. High-speed, efficient and hygienic delivery of qualified bottles to the three-in-one machine to meet the needs of high-speed canning, and improve the production efficiency of the whole line. After the air-feeding machine is designed to improve the design, it can reach the aseptic canned Production requirements.

The equipment introduces the advanced technology of the United States, and the precision machine manufactures the bottle unscrambler. After the bottle is sent to the outer track, it is sent to the control part and the special control belt is used to organize the bottle into a uniform form for easy operation. Filling, bottle unscrambler design, quick changeover, strong applicability, can handle all kinds of bottles, safe operation and easy to master.

Automatic Rotary Bottle Unscrambler Features:

1. The main motor reducer adopts a torque limiting mechanism to prevent damage to the machine in the event of a fault.

2, using two push-up bottling mechanism to ensure that each drop-off station has a bottle to improve the efficiency of the bottle.

3. Use the hanging bottle mouth to transport the air duct to prevent the bottle from tipping over during transportation.

4, with a broken bottle rejection mechanism.

5, with a card bottle detector, automatically stop and alarm when the bottle is bottled.

6. There is a bottleless detector for sending a working signal to the hoist, and the hoist will automatically replenish the bottle.

7. The photoelectric switch is equipped with a photoelectric switch for controlling the start and stop of the bottle unscrambler.

8. The bottle unscrambler is equipped with a grease fitting for easy lubrication of gears, bearings and cams.

9, with maintenance doors and mold replacement doors.

10. The main electrical components (inverter, PLC, photoelectric switch, relay) use MITSUBISHI, OMRON, SIEMENS and other components.

11. The pneumatic system adopts imported products.